| Single Stage System.
This design has four main legs. The switched power supply
in this system does not need to provide high amperage
to the toggle switch. A switched auxiliary port on the
fuse panel is an excellent choice. Run from the toggle
switch, through the optional momentary switch
to the #86 connection on the relay. From the relay
(connection #85), wire through an optional Hobbs
switch, or directly to the full-throttle switch and then
to ground. The switch is to be wired using the ‘NO’
(normally open) terminal and the ‘COM’ (common)
terminal as shown in the diagram. |
| To supply power to
the solenoids, it is recommended to run from the positive
terminal of the battery to the #30 connection. From
relay connection #87, run to the solenoids and from
the solenoids to a good ground. |
| Dual Stage System.
As shown in the diagram, the dual stage wiring represents
the single stage with each stage repeated. |
